I. Mobile Phones with MagSafe-like Function (Not Applicable to realme Phones)
For mobile phones that support the magnetic-absorption function (note that realme phones do not support this function), attach the cooling pad to the back of the phone and then plug it in to start using it.
II. Mobile Phones without MagSafe-like Function (Applicable to realme Phones)
Method 1: Using a Magnetic sheet
1. Peel off the release paper and stick the magnetic sheet onto the back of the phone.
2. Attach the cooling pad to the back of the phone by using the magnetic force.
3. Connect the power supply: Insert the Type-C charging cable into the input port (at the bottom) of the cooling pad. Then connect the other end of the cable to a power adapter or a power bank. Once connected, the indicator light on the cooling pad will stay on, the fan will start spinning, and the cooling pad will begin to work.
4. Adjust the gear: Use the power switch button. Press the power key briefly to switch between gears. The default is the high-gear setting. Press the power key briefly once to switch to the low-gear setting. Press the power key briefly again to turn off the cooling pad.
Method 2: Using a Buckle Mode
1. As shown in the figure below, press the protruding part of the clip in the direction of Arrow 1 and then place it into the slot. Next, press the clip downwards in the direction of Arrow 2 as shown in the figure to secure it.
2. Connect the power supply: Insert the Type-C charging cable into the input port (at the bottom) of the cooling pad. Then connect the other end of the cable to a power adapter or a power bank. Once connected, the indicator light on the cooling pad will stay on, the fan will start spinning, and the cooling pad will begin to work.
3. Adjust the gear: Use the power switch button. Press the power key briefly to switch between gears. The default is the high-gear setting. Press the power key briefly once to switch to the low-gear setting. Press the power key briefly again to turn off the cooling pad.
III. Installation Video
