1. Function introduction:
It needs to set an IP address when the internet needs to fix the Ip address but the router doesn't assign IP addresses automatically.
You can type the IP address according to your needs through the below steps.
2. Operation and path
Please follow these steps below:
Step 1. Connect to a wired network and enter the Network&Internet Menu
Setting method 1: Select the ethernet icon in the interface and enter the Network&Internet
Setting method 2: Select the Settings icon in the interface and enter the Settings menu, then select the Network&Internet and enter the menu.
Setting method 1
Setting method 2
Step 2. Use the remote to scroll down to the end of the menu. Select the IP settings and enter the next menu.
Step 3. DHCP is the default setting. Please select the Static and enter the next menu
Step 4. Enter a valid IP address, and select → to continue
Note:
1. Avoid using the same IP address on different devices to prevent being unable to connect to the Internet due to IP conflict.
2. The figure provided is only for illustration, please refer to the actually displayed interfaces and functions as final.
3. It isn't applicable to the realme Smart TV NEO 32" due to the system difference.
