realme Band: Quick Start Guide

Update Time: 2020-03-05 19:40:26

This guide contains important information. Please read carefully before using the product -
 

Product overview and packaging content:



 

Instructions for use:

1. Turning on


The product automatically turns on when charging.

Note: Before first time use, make sure to charge the band to activate it.
 

1. Turning off

The product automatically turns off when the battery level is less than 3%. 
 

2. Operations



 


1. On the main interface or sub-interfaces, press the Function key to switch between same-level interfaces;

2. Press and hold the Function key to access a sub-interface or return to the upper-level interface.

3. Each interface supports both Landscape and Portrait modes, which can be configured on the app.
 

1. Setting up the band


realme Link app allows to set up the band.
 

(1) Downloading realme Link

Install the app by searching and downloading “realme Link” on the App Store or Google Play on your smart devices.
System requirements:




 

(1) Binding the band
 

On the “Adding a device” interface of realme Link app, select the corresponding device from the device list. On the “Binding confirmation” interface of the band, press and hold the Function key to confirming the binding.

(2) Synchronizing data


Data is generated during daily use of the band. Synchronize the data of the band with the app by connecting your smartphone to the band.

 

Functions



(1) On the “Today’s status” interface, press and hold the Function key to access the “Details” pages. Press the Function key to switch between the “Details” pages. On last page, press the Function key to return to the “Today’s status” interface.


 


1. Heart rate measurement




 

(1) The band automatically measures heart rate when switching to the “Heart rate measurement” interface.
(2) 24-hour heart rate monitoring mode can be enabled/disabled on the app. (Power consumption increases when enabled)

 

1. Exercise Mode
 

4.1 Start of exercise




 

(1) Press the Function key to switch between exercise types. On one exercise interface, press and hold the Function key to enter the corresponding exercise mode.
(2) Three exercises are displayed by default: Cricket, Yoga, and Run. Default exercises displayed can be changed via the app.

4.1 Data during exercise

(1) During exercise, press the Function key to display various exercise data. To end an exercise, press and hold the Function key.

4.2 End of exercise


(2) After an exercise ends, exercise data details are displayed. Press the Function key to display the next exercise data page. On last page, press the Function key to return to the exercise mode.
(1) Exercise data is saved on the band only if an exercise lasts for longer than 1 minute.

 

1. Alarm



 


Alarm interface is displayed after an alarm is set via the app. Alarm interface is not displayed if no alarm is set. To turn on/off the alarm, press and hold the Function key.
 

6. Regulatory








Steps to search indian Regulatory:


Press and hold the function key to access Regulatory--Product model--Product name--Certification Information.

7. Other functions

7.1 Notifications


(4) Targets achieved reminder: The band reminds you when your exercise targets of today are achieved. Today’s targets can be set on the app.
(3) Sedentariness reminder: This reminder is displayed when the band detects that you have been sitting for a long time. This function can be enabled/disabled on the app.
(2) Text messages: A notification is displayed when a text message is received. This function can be enabled/disabled on the app. Types of reminder message can also be set via the app.
(1) Incoming calls: Press the Function key to neglect an incoming call. Press and hold the Function key to reject an incoming call.

 

7.2 Automatically identifying exercise types


 

(1) This function can be enabled/disabled on the app.
(2) When enabled, the band reminds you to enter the corresponding exercise mode if it recognizes that you are running/walking. Press and hold the Function key to enter the exercise mode. Press the Function key to exit the reminder.

7.3 Unlock by just being near

When this function is enabled on your phone, your phone stays under Password-less state if it is connected to the band. In this case, your phone can be accessed at any time without entering any password.







 

Thanks for your feedback.
Please tell us how to help you better
0/300
Didn't find what you were looking for? Please Contact us.

realme is committed to offering powerful performance, stylish design, sincere services and exploring more possibilities of smartphones. realme has launched 13 products, which includes realme 1, realme 2, realme 3, realme 2 Pro, realme 3 Pro, realme U1, realme C1, and realme C2, realme 3i, realme 5, realme 5 Pro, realme X and realme XT.


Choose your market
Products may have different prices and availability based on market
Asia-Pacific
Europe
Middle East and Africa
Other Regions