Product Description

User Guide

1. Ensure the power switch at the off position, connect the power plug to the power socket, and push the power switch to select the appropriate air flow level.

2. Press the air temperature button to switch between cool air and hot air modes. The next time when it is turned on, the default mode is the one when it was turned off last time.

3. Align the bottom of the air nozzle with the air outlet and press lightly, and you will hear a "click” sound, indicating that it is installed successfully. Hold the nozzle and it can be easily removed from the air outlet.

Warning: Please install the nozzle in the shutdown state, and do not adjust, install or remove the nozzle during use to avoid burns.

4. When using, please keep hair more than 10 cm away from the air inlet to prevent the hair from being caught in the hair dryer; please keep hair more than 3 cm away from the air outlet to avoid hair burns.

5. After use, please pull the power switch to off position and pull out the power plug.

Product cleaning and maintenance

1.If dust or foreign matter is attached to and clog the air inlet occurs, it will cause product performance degradation, and may also cause the following failures:

l  Sparks appear inside when the product is used in hot air mode. The sparks are generated by the activation of the protective device (thermal switch) and are not dangerous.

l  Hot air sometimes becomes cool air.

l  The hot wind became extremely hot.

2.Preparations

When cleaning and maintaining this product, be sure to unplug the device after confirming that the power switch is turned off. It is strictly forbidden to perform cleaning and maintenance operations without unplugging the device.

3.Cleaning and maintenance of air inlet

When there is dust or hair on the surface of the air inlet, please use a dry cloth or a soft toothbrush to clean it.

When there is dust inside the air inlet, it is recommended to use a handheld vacuum cleaner for simple cleaning.

Do not use fingernails or other sharp objects to press or rub the air inlet, otherwise it may cause damage to the air inlet, resulting in a fire, electric shock, malfunction, etc.

4. Cleaning and maintenance of air outlet

When there is dust or hair on the surface of the air inlet, please clean it with cotton swabs. Do not use sharp objects to reach into the hair dryer or touch the heating wire, otherwise the hair dryer may be damaged, resulting in a fire, electric shock, malfunction, etc.

Dust may be scattered during the cleaning process or when the product is used for the first time after cleaning. Please confirm that there is no dust before using this product.

It is strictly forbidden to look into the air outlet during use, otherwise there may be dust or other objects blown out, resulting in injuries.

5. Cleaning and maintenance of the body When there is any dirt on the body, wipe it with a dry cloth.

Do not use alcohol, gasoline, paint thinner, benzene, nail polish remover, detergent or other chemicals, otherwise it may cause surface crack, a fire, electric shock, malfunction, etc.

6. Cleaning and maintenance frequency It is recommended to perform the above cleaning and maintenance once a month.

Product parameters