realme Smart Scale Quick Start Guide

Update Time: 2021-09-15 08:54:01

Product Description

Operating Manual        

1. Install batteries

Take the scale from the plastic bag, open the battery case at the bottom of the scale, pull out the insulation sheet from the battery jar and cover the battery cover.

2. Application Installation and Using Help

Scan the QR code below to install the [realme Link] APP or scan the QR code about [Using Help] to obtain relevant instructions.

3. Bind the body fat scale

Display Screen

After the measurement is completed successfully, the measured data will be uploaded to the realme Link APP (The data about heart rate can only be displayed on the scale for the present.). You can check the data and analysis in the APP.

4. Click the button of “Step on” in the APP and measure yourself barefooted.

Correct standing posture.

The feet should be distributed naturally at both sides with the scale center as an original point.

Note: In order to guarantee data accuracy, you are suggested to adopt a correct standing posture barefooted for the measurement.

5. Heart rate measurement

Heart rate measurement will begin after the data about weight is locked and displayed for 3 seconds.


Warning

l  The product is forbidden to be dismantled, extruded, stabbed or short-circuited randomly or put in water or fire or exposed in an environment with a temperature higher than 60℃ (140°F).

A person installed with a cardiac pacemaker or other medical appliances is forbidden to use this product. A pregnant woman should use this product with caution and should follow the doctor's advice.

CAUTION:

l  Risk of explosion if the battery is replaced by an incorrect type. Replace only with the same type alkaline battery.

l  Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

l  Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.

l  A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

 

Important Instruction

l  This product is not a medical appliance.

l  The measured data from the realme Smart Scale are for reference only and should not serve as a basis for medical opinions.

 

Product parameters

Parameter   classification

Detail

Product Name

realme Smart   Scale

Model

RMH2011

Color

Blue, White

Product   Dimention

300X300X23.25mm

Net Weight   (without battery)

1.69kg

Weighing Unit

 kgLB

Shell Material

ABS121

Weighing Range

0.05kg-150kg

Minimum   Graduation

-   0.05kg-9.99kg  indexing0.01kg
  - 10kg-99.95kg   indexing
0.05kg
  - 100kg-150kg    indexing
0.1kg

Tolerance   Scope

0.05kg-9.99kg   error range ±0.03kg
  10-50kg        error range
±0.2kg
  50.05-100kg    error range
    ±0.3kg
  100.1-150kg    error range
    ±0.4kg

Bluetooth   Version

5.0

Range of   Working Temperature

5℃-40℃

Power Supply

DC 6V   4*AAA

Working Hours (Weighing   3-4 times A Day)

360 DAYS

Operating   System Requirements

Android 5.0   and above.

Package   Contents

Southeast   Asia(without ID) Versionrealme smart scale*1AAA Batteries*4Operating manual & warranty card
 
 

West Europe   & IDrealme smart   scale*1, Operating manual & warranty card


Thanks for your feedback.
Please tell us how to help you better
0/300
Didn't find what you were looking for? Please contact us.
Choose your market
Products may have different prices and availability based on market
Asia-Pacific
Europe
Middle East and Africa
Latin America
Other Regions